Deep Pan for all 2003 to 2007 6.0L Ford Powerstroke Diesel with 5 Speed Torque Shift Trucks. Works on all 6.0L engines and also on some 6.4L Powerstrokes with 3" wide rectangle surface on center of the Pan.

ATTN: 2008 6.4L Owners, to help you distinguish the correct pan for your truck, it will be important to check the width of the long rectangle surface in the center of the pan. The “New” #F5R110W will be approximately 4 1/2" wide. The #F5R110 will be approximately 3" wide. Holds 8.3 quarts more fluid than stock pan. Includes Bolt kit and Drain Plug. Overall height 6 1/8".

Mag-Hytec’s heavy duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working diesel trucks like yours. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and function – cast in A356-T6 aluminum and texture powder coated black with machined cooling fins.

Magnetic drain plugs trap worn gear material promoting fluid integrity. As the metallic components in transmissions and axles wear, they generate very fine particle debris that becomes suspended in the lubricating oil. A suspended magnet acts as a filter to contain these particles, keeping the fluid cleaner and extending component life. Periodic checking and cleaning of the magnet is recommended for maximum fluid service life.

Key Transmission Pan Features

• Deep high-capacity sump for maximum cooling

• Magnetic drain plug

• 303 hardware except allen head cap screws are zinc plated

• 1/8 NPT temperature sender port

• Finned aircraft aluminum construction

• Requires only three allen key wrenches (included) for installation and service

• O-rings require no gaskets or sealants*

MAG-HYTEC Deep Transmission Pan MAGF5R110 will fit:

2003 – 2007 6.0L Powerstroke Diesel equipped Ford trucks.

2008 6.4l Powerstroke (some). Check for 3" wide rectangle surface on the center of your pan.

Based out of Van Nuys, California, Mag-Hytec is recognized as the industry leader in heavy duty differential covers and transmission pans.

Heavy duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working recreational and service vehicles.

Mag-Hytec covers and pans are cast in A356-T6 aluminum and texture powder coated black with machined cooling fins. Magnetic drain plugs trap worn gear material promoting fluid integrity. Each unit is fitted with ARP 568 O-rings for superior sealing. All hardware is 303 stainless steel, in most applications no gasket or sealant is required.

Mag-Hytec is synonymous with high quality differential covers and transmission pans, so you can depend on Mag-Hytec when you’re pulling a heavy load.

Links

• Manufacturer Product Web Page
• Product Installation Manual
• Manufacturer Product Support
• Manufacturer Warranty

Manufacturer Contact Info:

818-786-8325

MAG-HYTEC
14718 Arminta Street
Van Nuys, CA 91402