Use Less Fuel And Get More Power With The E-CON™ Economy Power Programmer

The Max Energy E-CON™ Economy Power Programmer is designed for the driver who needs better fuel mileage and more power, but doesn’t want to pay for other high-performance features they may not need. Every E-CON is programmed with Hypertech’s Max Energy™ Tuning-The best optimized fuel tuning programs possible that also increase horsepower and torque.

With the additional power and optimized transmission functions, drivers use less fuel to accelerate and maintain cruising speeds without the torque converter un-locking and transmission down-shifting to a lower gear. The results are improved power and maximum fuel mileage. Depending on your driving habits you can expect 2 to 6 mpg gains and a substantial increase in horsepower and torque.

For an additional charge, the E-CON can be upgraded to a Max Energy Power Programmer via the internet to include all the Max Energy features available for that vehicle.

Performance Gains for 2006-2010 6.0L & 6.4L Powerstroke

• Fuel Program B: +80HP +131TQ
• Fuel Program A: +44HP +72TQ

Max Energy E-CON™ Power Programmer Features

• Engine Tuning
• Diagnostics
• Return to Stock
• Internet Updateable

Engine Tuning

• Max Energy Tuning extracts every bit of energy possible out of every molecule of fuel giving you more miles at part-throttle and and more power at wide-open throttle. In order to increase engine efficiency, horsepower and torque, the Hypertech engineers optimize the spark and fuel curves point by point over the entire rpm band.

Diagnostics

• If you get a “check engine” light or “service needed” message, the Max Energy will allow you to read the code and gives you the ability to clear the code and turn the “check engine” light off. You can then make the necessary repairs to prevent the light from coming back on.

Return to Stock

• Hypertech’s E-CON downloads and saves the stock tuning program, then uploads your customized Power Tuning program. Before taking your vehicle into a dealership for service, always return the vehicle’s computer back to the factory programming. Once you have the vehicle back from the dealership, reinstall the E-CON Power Programming as before. The E-CON can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friend’s vehicle, simply return your vehicle to the stock tuning program and you may then use the programmer on another vehicle that is covered in the same part number.

Internet Updateable

• The E-CON comes with a USB cable and a CD containing software to enable quick updates or upgrades over the internet. If your vehicle has a new calibration not available when your E-CON was manufactured, it is possible that you will see a “Cal not found” message on the E-CON screen. If this occurs, you can simply update your E-CON with the correct new calibration via the internet. Simply connect the E-CON (using the provided USB cord) to your computer and go to www.hypertech.com. Then click on the Support button to get update downloads. You can also get the update downloads using the supplied CD which in addition contains an installation video and a printable version of the instruction manual.

Hypertech Max Energy E-Con Power Programmer HYP43005 will work with:

2006-2007 – ALL FORD TRUCKS AND VANS WITH 6.0L POWERSTROKE DIESEL ENGINE.

2008-2010 – ALL FORD TRUCKS WITH 6.4L POWERSTROKE DIESEL ENGINE.

COMING SOON!

In the meantime, check out our other Parley’s Diesel Product Installation Videos

The knowledge and skill of the Hypertech team is their most valuable asset. Their staff of engineers and technicians has degrees in a variety of disciplines, including electrical engineering, computer science, and mechanical engineering. Hypertech people know computers from the inside out! The Hypertech team is passionate about performance and their team members have racers, hot rodders, and performance trucks for towing on weekends.

Hypertech is the technology leader in high-performance engine tuning computer-controlled vehicles. Electronic engine controls have evolved rapidly since their introduction in the early ’80s. Hypertech has kept pace with these rapid advances in technology by developing power tuning products that take advantage of the capabilities of these electronic controls. Early automotive computers used replaceable PROMs or “chips” to calibrate the Electronic Control Module (ECM) for a specific engine, powertrain, and vehicle combination. Hypertech created the original Power Chips to recalibrate these electronic “brains” for improved performance.

Later generations of Electronic Control Units (ECU) eliminated calibration chips. Instead, engine tuning information is stored in the unit’s programmable memory. In addition to controlling basic engine functions, microprocessors now monitor and govern a wide range of systems, including the transmission, brakes, instrument panel, emission controls, and heating/air conditioning. For comparison, the code stored in an early chip would fill one page; now a typical ECU contains more than 1,600 pages of code!

Hypertech created the Power Programmer to access this “flash” memory and download the Hypertech Power Tuning program directly into the ECU’s programmable memory.

In addition to controlling engine functions such as air/fuel mixture, spark timing, and maximum rpm, these highly evolved ECUs also regulate transmission shift points and firmness, limit top speed, and display speedometer and odometer readings. Hypertech’s engineers were able to use these capabilities to provide additional features for enthusiasts. The Power Programmer is much more than a tuning chip – it is a self-contained automotive tuning computer. The Power Programmer automatically installs the powerful Hypertech tuning program. It also allows enthusiasts to access and reprogram the vehicle’s computer to function properly with aftermarket components such as non-stock wheels, tires, and rearend ratios. A Hypertech Power Programmer is really the most powerful and versatile tool a performance enthusiast can own!

Links

• Manufacturer Product Web Page
• Manufacturer Product Manual
• Manufacturer Product Support
• Manufacturer Warranty

Manufacturer Contact Info:

901-382-8888

Hypertech
3215 Appling Road
Bartlett, TN 38133-3999

This product is returnable.

Standard Parley’s Diesel Performance Return Policy applies.