Max Energy Tuning extracts every bit of energy possible out of every molecule of fuel giving you more miles per gallon at part-throttle and more power at wide-open throttle. In order to increase engine efficiency, horsepower and torque, our engineers first optimize the spark and fuel curves point by point over the entire rpm band. With the additional power and optimized transmission functions, drivers use less fuel to accelerate and maintain cruising speeds without the torque converter un-locking and transmission down-shifting to a lower gear. The results are maximum power and fuel mileage.

Key Features

• Hypertech Power Tuning
• Top-Speed Limiter
• Speedometer Calibrator
• Cooling Fan “On/Off” Temperatures
• Return To Stock Or Change Option Settings
• Automatic Transmission Adjustments
• RPM “Rev” Limiter
• Read & Clear Diagnostic Trouble Codes(DTCs)
• Internet Updateable

Three stages of diesel Power Tuning are available. Even the highest power level, Stage 3, maintains safe EGTs while towing the maximum weight specified by the vehicle’s manufacturer. No other tuner offers this level of power for towing. Hypertech’s low EGTs, proper transmission shifting and superior tuning that doesn’t require de-fueling, gives the Max Energy Power Programmer the performance advantage.

Automobile manufacturers limit a vehicle’s top-speed to match the speed rating of the factory-installed tires. If you have installed tires that have a different speed rating, the Max Energy allows you to raise or lower the vehicle’s top-speed limiter to match the speed rating of the newly installed tires. A tire’s speed rating for maximum safe speed under perfect conditions is marked on its sidewall. Always obey all traffic laws when driving and only use this feature for off-highway competition in sanctioned events.

If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy allows you to re-program for correct speedometer and odometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve made changes, the vehicle’s computer doesn’t know how fast your vehicle is going, causing auto transmission shift issues and less accurate speedometer readings.

The Max Energy allows you to adjust the “on/off” temperatures of your vehicle’s electric cooling fans to match a lower temperature thermostat, such as a Hypertech PowerStat. A low-temperature thermostat produces a cooler, denser intake charge, is less likely to detonate under heavy loads and allows the engine to make more power.

Hypertech’s Max Energy downloads and saves the stock tuning program, then uploads your customized Power Tuning program. Before taking your vehicle into a dealership for service, always return the vehicle’s computer back to the factory programming. Once you have the vehicle back from the dealership, reinstall the Max Energy Power Programming as before. The Max Energy can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friend’s vehicle, simply return your vehicle to the stock tuning program and you may then use the programmer on another vehicle that is covered in the same part number.

Increase shift firmness to maximize performance or when towing, to reduce clutch slippage and transmission oil temperatures. That means longer transmission life. However, this feature must not be used If you have installed an aftermarket shift kit. The Max Energy allows you to raise or lower the shift points in 100 RPM increments for maximum performance, quicker acceleration, and better 1/4-mile times. With the Max Energy Power Programmer, you have the ability to customize the shift points for every gear. Optimizing each shift point can definitely improve performance.

In today’s vehicles, the on-board computer controls maximum engine rpm. The stock computer is programmed to shut down the engine when it reaches its red-line. But if you have modified your vehicle to increase its high-speed performance, more rpm means more power. When you shift gears with the stock rpm limit, the engine falls back to below the peak of its horsepower curve. When you extend the engine’s rpm range with the Max Energy Power Programmer, your engine has more power available after gear changes. By adjusting the maximum rpm to keep the engine in the “sweet spot” of its power curve, you can increase the average horsepower that accelerates the vehicle.

If you get a “check engine” light or “service needed” message, the Max Energy will allow you to read the code and gives you the ability to clear the code and turn the “check engine” light off. You can then make the necessary repairs to prevent the light from coming back on.

The Max Energy Power Programmer comes with a USB cable and a CD containing software to enable quick updates over the internet. If your vehicle has a new calibration not available when your Max Energy Power Programmer was manufactured, it is possible that you will see a “Cal not found” message on the Max Energy screen. If this occurs, you can simply update your Max Energy with the correct new calibration via the internet. Simply connect the Max Energy (using the provided USB cord) to your computer and go to www.hypertech.com. Then click on the Support button to get update downloads. You can also get the update downloads using the CD which also contains an installation video and a printable version of the instruction manual.

Cummins Max Energy Programmers

	2007.5-2009 Cummins 6.7L Programmer Performance Gains: Stage 1 adds +26HP & +66TQ. Stage 2 adds +59HP & +130TQ. Stage 3 adds +85HP & +181TQ.	Part Number: 52009
	2007 Cummins 5.9L Programmer Performance Gains. Automatic Transmission: Stage 1 adds +30HP & +51TQ. Stage 2 adds +75HP & +125TQ. Stage 3 adds +113P & +185TQ. Manual Transmission Stage 1 adds +30HP & +51TQ. Stage 2 adds +113HP & +185TQ. Stage 3 adds +176HP & +298TQ.	Part Number: 52007
	2006 Cummins 5.9L Programmer Performance Gains. Automatic Transmission: Stage 1 adds +30HP & +51TQ. Stage 2 adds +75HP & +125TQ. Stage 3 adds +113P & +185TQ. Manual Transmission Stage 1 adds +30HP & +51TQ. Stage 2 adds +113HP & +185TQ. Stage 3 adds +176HP & +298TQ.	Part Number: 52006
	2005 Cummins 5.9L Programmer Performance Gains. Automatic Transmission: Stage 1 adds +30HP & +51TQ. Stage 2 adds +75HP & +125TQ. Stage 3 adds +113P & +185TQ. Manual Transmission Stage 1 adds +30HP & +51TQ. Stage 2 adds +113HP & +185TQ. Stage 3 adds +176HP & +298TQ.	Part Number: 52005
	2004 Cummins 5.9L Programmer Performance Gains: Stage 1 adds +98HP & +160TQ. Stage 2 adds +122HP & +200TQ. Stage 3 adds +174HP & +285TQ.	Part Number: 52004
	2003 Cummins 5.9L Programmer Performance Gains: Stage 1 adds +98HP & +160TQ. Stage 2 adds +122HP & +200TQ. Stage 3 adds +174HP & +285TQ.	Part Number: 52003
	1998.5-2002 Cummins 5.9L Programmer Performance Gains: Stage 1 adds +38HP & +99TQ. Stage 2 adds +48HP & +123TQ. Stage 3 adds +66HP & +174TQ.	Part Number: 52008

Powerstroke Max Energy Programmers

	2006-2010 Powerstroke 6.0L & 6.4L Programmers Performance Gains. 6.4L Powerstroke: Stage 1 adds +44HP & +72TQ. Stage 2 adds +80HP & +131TQ. Stage 3 adds +114HP & +188TQ. 6.0L Powerstroke: Stage 1 adds +37HP & +64TQ. Stage 2 adds +80HP & +131TQ. Stage 3 adds +115HP & +200TQ.	Part Number: 42005
	2003-2005 Powerstroke 6.0L Programmer Performance Gains: Stage 1 adds +37HP & +64TQ. Stage 2 adds +80HP & +131TQ. Stage 3 adds +115HP & +200TQ.	Part Number: 42002
	1996-2003 Powerstroke 7.3L Programmer Performance Gains: Stage 1 adds +32HP & +74TQ. Stage 2 adds +60HP & +113TQ. Stage 3 adds +100HP & +164TQ.	Part Number: 42001

Duramax Max Energy Programmers

	2006-2010 Duramax 6.6L LBZ & LMM Performance Gains. 6.6L Duramax LMM: Stage 1 adds +44HP & +83TQ. Stage 2 adds +64HP & +119TQ. Stage 3 adds +91HP & +164TQ. 6.6L Duramax LBZ: Stage 1 adds +46HP & +88TQ. Stage 2 adds +62HP & +120TQ. Stage 3 adds +95HP & +178TQ.	Part Number: 32003
	2001-2005 Duramax 6.6L LB7 & LLY Performance Gains. 6.6L Duramax LLY: Stage 1 adds +32HP & +68TQ. Stage 2 adds +52HP & +108TQ. Stage 3 adds +87HP & +173TQ. 6.6L Duramax LB7: Stage 1 adds +73HP & +120TQ. Stage 2 adds +94HP & +155TQ. Stage 3 adds +113HP & +185TQ.	Part Number: 32001