Fuel Your Ride — Get FASS’ed! Built from the FASS HD Series blueprint, the Titanium Series utilizes all the known FASS System features, just in a compact package. The Titanium Series 150 GPH Fuel Air Separation System allows for better clearance and less visibility without sacrificing any of the power and grit of the HD Series — the same motor & Gerotor specific design are still used. Engineered with the pickup truck in mind, this lift kit supports diesel engines with moderate to extreme horsepower modifications. Just like its big brother it removes all types of harmful and destructive fuel contaminants including water & emulsified water, air & vapor, and general debris. The Titanium Series FASS System increases your horsepower & fuel economy while it lowers your maintenance costs & emissions. So whether you are looking to increase the life & reliability of your truck — or seeking the means to support your Cummins engine’s upgrades… think FASS — Titanium Series FASS!

Key Features

• Increase Horsepower & Torque
• Compact Size Allows for Better Clearance and Less Visibility
• For Trucks with Moderate to Extreme HP Modifications
• Increases Injector Life & Dependability
• Aircraft Quality Billet 6061 T-6 Aluminum
• Increases Fuel Mileage ^{Calculate your estimated fuel savings below.}
• Consistent Engine Performance: Hot or Cold — Full or 1/4 Tank
• 100% Assembled, Tested & Made in the USA
  
  

Obsessed with providing the absolute best conditioned fuel to your diesel engine, FASS Fuel Systems has an entire R&D team developing solutions to the problems that contaminants in diesel fuel wreak upon your truck. Along with Cummins and other diesel industry leaders, they recognize the severity that problems with the fuel supply — including air/vapor in fuel — can cause. From FASS, here is just the short list:

• Low Horsepower
• Low Fuel Mileage/Poor Fuel Mileage
• Excessive Smoke
• Injector Failure
• Hard Start or Will Not Start
• Engine Surges at Low Idle
• Warm Engine Runs Rough or Misfires in Operating Range
• Rough Idle
• Engine Will Not Reach Rated Speed When Loaded

Considering typical No. 2 Diesel Fuel consists of about 10% air, these problems are nothing to sneeze at or to be ignored. In reality, when compounded by dirt and other debris that can be found in a diesel fuel tank, you could be driving your truck towards a diesel engine disaster. FASS Systems address these issues head on by meticulously filtering out such problematic air & vapor — along with these other contaminants in the fuel — before it’s sent to your truck’s injectors. Knowing about these latent dangers lurking in the fuel at the diesel pump, can you really go on feeding it untreated to your truck? We at Parley’s strongly advise against it… and believe a FASS System is the way to go.

FASS is in the business of building extremely High-Quality fuel products. All of their efforts are concentrated in this one area. FASS takes great pride in this specialization and implements rigorous testing procedures for each FASS product so you can share this same pride — that you are running with the Highest-Quality fuel system in the world. Eliminate the Contaminants & Save your Injectors… Think FASS!

FASS – Estimated Fuel Savings Calculator

FASS Titanium Series 150 GPH High Performance Fuel Delivery System TD07150G (T D07 150G) will fit:

• 2005 – 2007 Dodge 5.9L CR Cummins Trucks

• 2007.5 – 2012 Dodge 6.7L CR Cummins Trucks

FASS Fuel Systems has over 19 years experience in building the “Quietest” highest quality Fuel Air Separation Systems and electric diesel fuel pumps available worldwide. It is this experience, they say, that leads them to use a Gerotor specific fuel pump. Their success in the class 8 truck market has unstoppable. Their pumps typically last at least 700,000+ miles and the confidence is evident in their warranty — Offering warranties from 4 years on semi’s up to a lifetime warranty on pickup’s applications!

With over 90% of the machining, and 100% of the assembly and testing performed under one roof, they’ve been able to maintain the highest quality standards throughout the industry. The FASS systems undergo over 20 vigorous tests before being shipped to insure quality and performance.

With an on-site R&D department working to continually exceed your expectations, FASS uses one of the highest grades of Aircraft Quality Billet 6061 T-6 Aluminum, as a major component along with motor specific brushes in their electric motors to maintain the same high quality standard and increase the overall life of their units. Due to the brute size of their motor armatures, they are able to achieve superior levels of stall torque. This increased amount of stall torque insures extreme cold weather starts by flowing gelling fuel.

Links

• Manufacturer Product Web Page
• Manufacturer Installation Instructions
• Manufacturer Product Support
  
  

Diesel Performance Products/FASS Return Policy:

For any product that is malfunctioning, faulty or has been damaged during shipment, that product must be handled directly through the DPP/FASS Technical Support department:

Technical Support:
Diesel Performance Products, Inc.
16240 Hwy O Suite B
Marthasville, MO 63357
636-433-5410

For more information please see the FASS Policies & Procedures page.

For any other non-defective product returns, please refer to the standard Parley’s Diesel Performance Return Policy.

Manufacturer Contact Info:

Telephone: 866-POWER HP (866-769-3747)
Email: Techsupport@FASSride.com

Diesel Performance Products, Inc.
16240 Hwy O Suite B
Marthasville, MO 63357