Fuel Your Ride — Get FASS’ed! From the FASS HD Series, the mother of all diesel fuel pumps, comes the 150 GPH fuel air separation system supporting Chevy/GMC diesel engines with moderate to extreme horsepower needs. Providing consistent, high performance improvements, the FASS HD Series is “Untouchable” in the diesel pickup truck market. This lift pump removes all types of harmful and destructive fuel contaminants including water & emulsified water, air & vapor, and general debris. In doing so, FASS increases your horsepower & fuel economy while it lowers your maintenance costs & emissions. So whether you are after increasing the life & reliability of your truck — or seeking the means to support your Duramax engine’s upgrades… think FASS!

Key Features

• Increase Horsepower & Torque
• For Trucks with Moderate to Extreme HP Needs
• Increases Injector Life & Dependability
• Aircraft Quality Billet 6061 T-6 Aluminum
• Increases Fuel Mileage ^{Calculate your estimated fuel savings below.}
• Robust, Large Filters with Extremely Long Life
• Consistent Engine Performance: Hot or Cold — Full or 1/4 Tank
• 100% Assembled, Tested & Made in the USA
  
  

Obsessed with providing the absolute best conditioned fuel to your diesel engine, FASS Fuel Systems has an entire R&D team developing solutions to the problems that contaminants in diesel fuel wreak upon your truck. Along with Bosch and other diesel industry leaders, they recognize the severity that problems with the fuel supply — including air/vapor in fuel — can cause. From FASS, here is just the short list:

• Low Horsepower
• Low Fuel Mileage/Poor Fuel Mileage
• Excessive Smoke
• Injector Failure
• Hard Start or Will Not Start
• Engine Surges at Low Idle
• Warm Engine Runs Rough or Misfires in Operating Range
• Rough Idle
• Engine Will Not Reach Rated Speed When Loaded

Considering typical No. 2 Diesel Fuel consists of about 10% air, these problems are nothing to sneeze at or to be ignored. In reality, when compounded by dirt and other debris that can be found in a diesel fuel tank, you could be driving your truck towards a diesel engine disaster. FASS Systems address these issues head on by meticulously filtering out such problematic air & vapor — along with these other contaminants in the fuel — before it’s sent to your truck’s injectors. Knowing about these latent dangers in the fuel at the diesel pump, can you really go on feeding it untreated to your Duramax truck? We at Parley’s strongly advise against it… and believe a FASS System is the way to go.

^{How FASS Works}

FASS is in the business of building extremely High-Quality fuel products. All of their efforts are concentrated in this one area. FASS takes great pride in this specialization and implements rigorous testing procedures for each FASS product so you can share this same pride — that you are running with the Highest-Quality fuel system in the world. Eliminate the Contaminants & Save your Injectors… Think FASS!

FASS – Estimated Fuel Savings Calculator

Suction Line Notes: Due to the increase of fuel flow you may encounter a problem with the stock fuel module. Adding an optional FASS suction tube kit (STK-1002) will solve that issue.

FASS HD Series 150 GPH High Performance Fuel Delivery System HDC10150G (HD C10 150G) will fit:

• 2006 – 2007 Chevy/GMC 6.6L Duramax LLY/LBZ Silverado/Sierra 2500HD & 3500/HD Trucks

• 2007 – 2010 Chevy/GMC 6.6L Duramax LMM Silverado/Sierra 2500HD & 3500HD Trucks

FASS Fuel Systems has over 19 years experience in building the “Quietest” highest quality Fuel Air Separation Systems and electric diesel fuel pumps available worldwide. It is this experience, they say, that leads them to use a Gerotor specific fuel pump. Their success in the class 8 truck market has unstoppable. Their pumps typically last at least 700,000+ miles and the confidence is evident in their warranty — Offering warranties from 4 years on semi’s up to a lifetime warranty on pickup’s applications!

With over 90% of the machining, and 100% of the assembly and testing performed under one roof, they’ve been able to maintain the highest quality standards throughout the industry. The FASS systems undergo over 20 vigorous tests before being shipped to insure quality and performance.

With an on-site R&D department working to continually exceed your expectations, FASS uses one of the highest grades of Aircraft Quality Billet 6061 T-6 Aluminum, as a major component along with motor specific brushes in their electric motors to maintain the same high quality standard and increase the overall life of their units. Due to the brute size of their motor armatures, they are able to achieve superior levels of stall torque. This increased amount of stall torque insures extreme cold weather starts by flowing gelling fuel.

Links

• Manufacturer Product Web Page
• Manufacturer Installation Instructions
• Manufacturer Product Support
  
  

Diesel Performance Products/FASS Return Policy:

For any product that is malfunctioning, faulty or has been damaged during shipment, that product must be handled directly through the DPP/FASS Technical Support department:

Technical Support:
Diesel Performance Products, Inc.
16240 Hwy O Suite B
Marthasville, MO 63357
636-433-5410

For more information please see the FASS Policies & Procedures page.

For any other non-defective product returns, please refer to the standard Parley’s Diesel Performance Return Policy.

Manufacturer Contact Info:

Telephone: 866-POWER HP (866-769-3747)
Email: Techsupport@FASSride.com

Diesel Performance Products, Inc.
16240 Hwy O Suite B
Marthasville, MO 63357