Andersen Hitches 3221 Ultimate Connection Lowered Flatbed Mount 5th Wheel Hitch

Important Notes: This unit is 4” lower than the standard Ultimate Connection Gooseneck Mount, part 3220, and is intended to be used with flatbed trucks that have a recessed gooseneck ball. If your gooseneck ball is not recessed, please see part # 3220. Using the 3221 base in a truck bed that has sidewalls may cause damage to the truck or hitch. Please call us if you have any questions. When you place your order please add a note providing us with a measurement with the distance from the top of the flatbed deck down to the top of the gooseneck ball. Also, because these have to be paired up with specific coupler tubes, they take an extra day or two to ship out.

• Specially made for flatbed trucks with RECESSED gooseneck ball
• Lightweight Gooseneck Mount Base Weighs Less than 40 Pounds
• Built-In Ball Funnel On the Kingpin Coupler Block Has a 3" Offset, Eliminating the Hassle of Perfectly Lining up the Hitch Ball with the Kingpin
• Breakaway Brake Cable Connection
• 24,000 Lbs. GTWR
• 4,500 Lbs. Tongue Weight
• Works with all Standard Brands of Gooseneck Hitches
• 3 height adjustments (measured from bed of truck to top of ball mount): 12-3/8” lower position, 13-7/16” middle position and 14-5/8” upper position
  
  

The Andersen Ultimate Hitch has been SAE tested. During this thorough and strenuous testing, the new Ultimate Connection Gen 3 passed nine tests. These included static tests of force against the hitch in six different directions, and three dynamic tests with 300,000 cycles each. The same hitch was used for all the SAE tests and passed each test with flying colors.

Notes: Using any Ultimate 5th Wheel Connection with a Rota-Flex Pin Box requires an Andersen Rota-Flex Lockout Kit. Also, If you have a MORryde Pin Box, this is compatible with all versions of the Ultimate Connection ONLY when it is installed with MORryde part # RPB77-006.