Gain 15 Extra Horsepower 30 ft. lbs of additional torque 100% polyurethane means longer life

Airflow increase from 145 CFM to 245 Gain Horsepower and Torque to Tow easier Produce more power without melting down turbo

Increase airflow 200% over stock with this easy to install aFe Cold Air Intake. This aFe Magnum Force Intake simply replaces the stock intake box for quick easy installation with only simple hand tools. Gain up to 15 HP, all while lowering EGT's and decreasing spool-up time. The aFe Cold Air Intakes' high flow tube to the turbo replaces the very restrictive stock one. You will hear a light increase in turbo whistle with this stage 2 kit.

Increase Horsepower and Torque without adding any items on your truck!!! (But once you put an exhaust or a chip you will see even more out of the intake.) This aFe Magnum Force Intake is Dyno-tested up to 15 horsepower gain and up to 30 ft. lbs of torque !!! The aFe Cold Air Intake will allow cooler air into your intake which will reduce the exhaust gas temperature (EGT's) which will allow it to produce more power and cool down the temperature in the turbo so you won't melt down the turbo !!! This aFe Cold Air Intake is hooded also so it will reduce the noise level compared to other aftermarket intakes.

The aFe Magnum Force Cold Air Intake is made out of 16 gauge steel which is powder-coated black. The Heat Shield is welded completely and has a durable corrosion resistant powder-coating on it. Airflow increases from 145 CFM stock vs. 245 for this aFe Magnum Force Cold Air Intake. Multiple layer cotton gauze filter provides depth and surface filtration media for increase airflow. 100% polyurethane construction results in longer life. Gain Horsepower and Torque so you can tow with ease !!! The bigger air tube will increase the airflow which allows your truck to breath better. The aFe Cold Air Intake has a rubber trim seal for a tight hood seal. Helps keep hot engine air out and the cool air in!!

Key Features: Medical grade cotton gauze filter media Multi-layered progressively tighter weave cotton gauze Deepest pleats in the industry Sturdy epoxy coated wire mesh construction Factory pre-oiled with non-surfactant containing refined oil. 100% polyurethane construction Pliable progressive polyurethane seal Minimal wicking Washable/reusable cotton gauze media

Benefits: Tight seal without gaskets or sealants Protects filter media (and engine) from large debris Attracts and traps contaminants without sacrificing airflow Maximizes airflow through pleats Will not damage sensitive electronic sensors Reduces air restriction and increases engine output Withstands extreme engine temperatures for extended-service life Tight seal without gaskets or sealants Larger filtration area for more airflow The last filter you will buy for your vehicle

Now Available - Pro-Guard 7 Upgrade High Efficiency. Tall Open Pleat Geometry Gives Max Air Flow and Longer Service Intervals. Will Not Collapse Under High Boost Pressure or Even When Wet. Patented Filter Technology. Maximum Protection.

To address the need for extra protection from dust and dirt with washable/reusable oil-impregnated cotton gauze filters, aFe developed a new filtration technology so revolutionary that they applied for and received a patent. This new filtration technology is called Pro-GUARD 7. Pro-Guard 7 air filter media is constructed using 5 layers of progressively finer mesh medical grade cotton gauze with micro fibers that attract smaller and smaller particles as air passes through is combined with 2 layers of random-porosity non-woven synthetic polyester fabric. This 7 layer combination of cotton gauze and non-woven polyester is sandwiched between 2 layers of epoxy coated aluminum wire mesh.