CFM+ White SmallMouth Intake Manifold for 2003-2007 Ford 6.0L Powerstroke 20-003-104
| Item Number | CFM20-003-104 |
| Price |
|

If you’ve wanted a smart and economical way to improve the overall performance of your 6.0L Ford Powerstroke this CFM+ SmallMouth Intake Manifold System is the way to do it. It offers a 40% increase in air flow over your current stock intake manifold. The opening on this model is the standard 3" diameter which means it will bolt right on with no need to change hoses or pipes.

Here you can see the difference between a CFM+ vs. stock intake.


This CFM+ SmallMouth Intake Manifold for the 6.0L Powerstroke has a single port which HAS been pre-drilled and tapped. It comes with an installation manual and all required hardware for mounting. The total system includes the SmallMouth Intake Manifold, 4 bolts, one gasket and 2 tie straps.
CFM+ SmallMouth Intake Manifold 20-003-104 will fit:
- 2003 – 2007 Ford Trucks & Excursions with 6.0L Powerstroke Engines
Note for 2004 Powerstrokes: This modification is considered an “off-road-only” modification on 2004 models. The 2003 model was built with an inert spacer between the intake manifold and the engine; there may be wires running to that spacer, but they are not live (hence, it can be removed without any problems). In the 2004 model, an active butterfly valve was placed within that spacer for exhaust gas recirculation purposes. While that spacer with the butterfly valve can be removed on the ’04 model, if you do so, you are modifying your EGR system and thereby possibly circumventing state or federal rules regarding emissions. Hence, for the 2004 model, 6.0L CFM+ intakes can only be used for off-road purposes. If you do choose to install this part for off-road use only, removing the spacer and butterfly valve will cause your truck to throw a cell. However, in most cases, it will not turn on your check-engine light. The entire spacer, including the butterfly valve, was removed beginning with the 2005 models and was not present on the 2006 or 2007 models. Since there is no spacer to remove, this intake manifold will bolt right onto your 2005 – 2007 model for a quick and easy installation.

Links
- Manufacturer Product Web Page
- Manufacturer Installation Manual
- Manufacturer Product Support
- Manufacturer Warranty
Manufacturer Contact Info:
760-598-2478
CFM Plus, LLC
3030 Enterprise Court, Suite D
Vista, CA 92081 US










