If you’ve wanted a smart way to really improve the overall performance of your 6.0L Ford Powerstroke this CFM+ LargeMouth Intake Manifold Kit with upgraded intercooler pipe is an excellent choice. It offers more than a 40% increase in air flow over your current stock intake manifold. The opening on this model is a large 3.5" diameter which means more air, and more air means more power, better fuel economy, better throttle response and lower exhaust gas temperatures.

All CFM Plus intakes are designed using proven engineering principles and the results are confirmed with bench flow testing. As you can see in the comparison images the stock intake with its sharp bend in the air flow path causes reduced flow and turbulence. This is typical of stock intakes as they are not designed for maximum air flow or performance. You can also see the difference in diameter between the black stock intercooler tube and the steel CFM Plus Intercooler pipe.

This CFM+ LargeMouth Intake Manifold Kit for the 6.0L Powerstroke 3 ports pre-drilled, tapped and plugs installed. In addition to the manifold, it comes with a bent 3.5" steel intercooler pipe which is reduced on one end, black hoses, clamps, an installation manual and all required hardware for mounting.

CFM+ LargeMouth Intake Manifold Kit 20-113-315 will fit:

• 2003 – 2007 Ford Trucks & Excursions with 6.0L Powerstroke Engines
  
  

Note for 2004 Powerstrokes: This modification is considered an “off-road-only” modification on 2004 models. The 2003 model was built with an inert spacer between the intake manifold and the engine; there may be wires running to that spacer, but they are not live (hence, it can be removed without any problems). In the 2004 model, an active butterfly valve was placed within that spacer for exhaust gas recirculation purposes. While that spacer with the butterfly valve can be removed on the ’04 model, if you do so, you are modifying your EGR system and thereby possibly circumventing state or federal rules regarding emissions. Hence, for the 2004 model, 6.0L CFM+ intakes can only be used for off-road purposes. If you do choose to install this part for off-road use only, removing the spacer and butterfly valve will cause your truck to throw a cell. However, in most cases, it will not turn on your check-engine light. The entire spacer, including the butterfly valve, was removed beginning with the 2005 models and was not present on the 2006 or 2007 models. Since there is no spacer to remove, this intake manifold will bolt right onto your 2005 – 2007 model for a quick and easy installation.

Links

• Manufacturer Product Web Page
• Manufacturer Installation Manual
• Manufacturer Product Support
• Manufacturer Warranty

Manufacturer Contact Info:

760-598-2478

CFM Plus, LLC
3030 Enterprise Court, Suite D
Vista, CA 92081 US